SealMate™ System with Sterile SealPlate 'Adhesive Microplate Sealing' Film Rolls

"a revolutionary new way of applying sealing films to microplates - FAST"

Includes two Sterile Adhesive SealPlate® rolls of sheeted sealing films and a Sterile EZ-to-Use Dispenser.

Two SealPlate® rolls contains enough film to cover 200 microplates.

SealPlate® film tape, a 38um thick polyester film, provides a secure seal designed to minimize evaporation, prevent spillage, and minimize contamination between wells. SealPlate® film tape is recommended for ELISA tests, general incubation, and short-term storage.

Temperature range for SealPlate Film: -40°C to 120°C. 
SealPlate films are non-pierceable.

________________________________________________

• Convenient, easy film application for microplates
• Three times faster than sheet films
• Inexpensive applicator
• Reduced waste; no protective backing to remove and discard
• Smooth lower surface for pressing film to the plate
• Available sterile and non-sterile
  
  
• Sealplate and AeraSeal films are available in the SealMate System.
• Seals color coded for identification:
      Green = SealPlate®;  Red = AeraSeal™

  The SealMate dispenser provides a protective enclosure for films on the roll prior to dispensing. It can be opened, permitting insertion of a new roll, then closed and latched securely by means of clasps at each side of its film-dispensing “bill.” Individual films on the roll are delineated by non-adhesive color bands that serve as end-tabs for positioning the films on the microplates. The bands also act as markers to show when the end of one film has been reached so that the next film is not pulled prematurely from the dispenser. Each non-adhesive band contains two perforations, the first of which, bounded by a small indent at the edges, tears easily to separate the sheet being dispensed from the next sheet on the roll. The second perforation permits the end-tab to be removed from the plate once the film has been applied.

  Several unique features contribute to ease and usability of the SealMate dispenser. A compression-brake mechanism prevents the roll from turning as the dispensed sheet is separated from the roll. The smooth lower surface can be swept across the film once applied to the plate to assure secure sealing around all wells. Thumb and forefinger notches above and below the film at the edge of the dispensing bill provide access to the non-adhesive band to facilitate pulling the next film from the dispenser. A prop on the lower surface prevents the bill from contacting the supporting surface when the dispenser is not in use. Alternatively, the dispenser can stand on one of the hubs at the roll ends during storage. The dispenser, thus parked, provides protection and keeps unused films handy for sealing subsequent plates without the need for opening small boxes or pulling individual films from plastic bags. The SealMate system reduces laboratory waste because the film is rolled on itself with no extra paper or plastic liner to be discarded before sealing the plate. 
  _____________________________________________________________________
  
  The Sterile Dispenser is easy to use!

  Sterile SealPlate rolls are easy to refill into the SealMate Dispenser (made from autoclavable polypropylene).
  To maintain sterililty, it is recommended to keep dispenser and refill rolls in a sterile environment.
  
  1. Pull out one seal
  2. Apply to plate
  3. Tear at the perforation
  4. Seal the film with the bottom of the dispenser