Labnet's 611 High Performance Incubators feature a broad temperature range and a digital microprocessor for precise control.
- Expanded temperature range
- Fail-safe over-temperature protection
- Switchable turbo fan
- Digital microprocessor
Incubator temperature is set and displayed digitally. Temperature is easliy set using the membrane keypad. The chamber is jacketed in warm air from all sides, including the door. Heating can be set to gravity convection, or for more rapid temperature change and better uniformity, mechanical convection. An independent safety thermostat protects the incubator and its contents in the event of a primary controller failure. All electronics are located away from the chamber, protected from heat related stress by a cooling fan.
Upon opening the outer door, the stainless steel chamber is illuminated. An inner glass door allows for easy visualization of samples. Small equipment, such as rockers and shakers, can be powered by the interior electrical outlet. Each incubator is supplied with two adjustable stainless steel shelves.
Specifications:
| Chamber Volume | 6.0 cu. ft. |
| Temperature Range | Ambient +5 to 95°C |
| Temperature Uniformity | |
| @37°C | ±0.25°C |
| @56°C | ±0.6°C |
| @90°C | ±0.9°C |
| Temperature Accuracy | ±0.2°C |
| Temperature Display "D" | to 0.1°C |
| Temperature Display "R" | to 1.0°C |
| Dimensions (WxDxH inches) | : |
| Chamber | 21x20x25 |
| Outer | 21x26x34 |
| Electrical | 120V/60Hz (850W) |
Recovery Time
(measured with fan on after door opened for 30 seconds) | |
| @37°C | 30 seconds |
| @56°C | 5 minutes |
These High Performance Digitally controlled incubators are used for applications requiring a wide range of temperatures from ambient +5°C to 95°C, allowing general incubation (<65°C) and experiments requiring higher temperature. Feature a digital microprocessor temperature control to assure accurate and reliable temperature stability. This control is designed to be set and displayed digitally for "set and forget" accuracy and peace of mind.
True digital / digital temperature control
The temperature is selected and displayed digitally. Enter a temperature by pressing the "up" or "down" arrow, and walk away.
Switchable turbo fan
A high performance fan assists the radiant heat distribution system. Fro rapid temperature changeover, simply press the fan switch to activate the turbo fan option. The fan increases circulation permitting rapid temperature increase and decrease. When the fan is activated, the forced circulation provides uniformity that is superior to standard mode radiant heat distribution.
Fail-Safe over temperature protection
An independent hydraulic safety thermostat protects samples and equipment from excessive heat in the event of a primary control failure. All electronics are located away from the heated chamber, protected from heat related stresses by a cooling fan (within the electronics module) which continuously bathes all components in ambient air, ensuring longer life of electronic control components.
Interior electrical outlet and illumination
Inside the stainless steel chamber, you'll find a recessed light source, allowing visual examination of samples through the gasketed inner glass door. The light is on only when the outer door is opened. An electrical outlet is provided for operation of optional equipment (rockers, shakers, etc.) inside the heated chamber.
Heated outer door
Warm air is evenly distributed from the bottom, the back, and both sides of the chamber. The outer door is also heated, enclosing the entire chamber in a warm air "jacket", eliminating localized hot spots. The heated door also prevents condensation on the glass door. The outer door's magnetic gasket automatically forms an airtight seal.
Adjustable shelves and leveling feet
Supplied with 2 adjustable stainless steel shelves and leveling feet to compensate for uneven bench surfaces.