This AeraSeal™ System features the dispenisng of breathable adhesive
plate sealing films from a fast and easy-to-use hand dispenser.
. . . . . . a New revolutionary way of applying sealing films ! !
Kit includes a SealMate™ dispenser and 2 AeraSeal™ rolls of sheeted sealing films.
Note: Two AeraSeal rolls contains enough film to cover 100 plates (2x50/roll).
AeraSeal ia 114um thick hydrophobic porous film (RNase/DNase/Cytotoxic). AeraSeal is breathable film featuring medical-grade adhesive. It is ideal for use with tissue culture plates, deepwell bio-blocks, and 96-well plates where gas exchange (air and CO2)in each well is required for cell or bacterial growth.
Temperature range: -20C to +80C.
AeraSeal™ films are pierceable with pipet tips or serological pipets for sample recovery.
The dispenser is easy to use !
- Convenient, easy film application for microplates
- Three times faster than sheet films
- Inexpensive applicator
- Reduced waste; no protective backing to remove and discard
- Smooth lower surface for pressing film to the plate
- Available sterile and non-sterile
- The SealMate™ System is available with either SealPlate® or AeraSeal™ films
- Seals color coded for identification:
green = SealPlate®; red = AeraSeal™The SealMate™ dispenser provides a protective enclosure for films on the roll prior to dispensing. It can be opened, permitting insertion of a new roll, then closed and latched securely by means of clasps at each side of its film-dispensing “bill.” Individual films on the roll are delineated by non-adhesive color bands that serve as end-tabs for positioning the films on the microplates. The bands also act as markers to show when the end of one film has been reached so that the next film is not pulled prematurely from the dispenser. Each non-adhesive band contains two perforations, the first of which, bounded by a small indent at the edges, tears easily to separate the sheet being dispensed from the next sheet on the roll. The second perforation permits the end-tab to be removed from the plate once the film has been applied.
Several unique features contribute to ease and usability of the SealMate™ dispenser. A compression-brake mechanism prevents the roll from turning as the dispensed sheet is separated from the roll. The smooth lower surface can be swept across the film once applied to the plate to assure secure sealing around all wells. Thumb and forefinger notches above and below the film at the edge of the dispensing bill provide access to the non-adhesive band to facilitate pulling the next film from the dispenser. A prop on the lower surface prevents the bill from contacting the supporting surface when the dispenser is not in use. Alternatively, the dispenser can stand on one of the hubs at the roll ends during storage. The dispenser, thus parked, provides protection and keeps unused films handy for sealing subsequent plates without the need for opening small boxes or pulling individual films from plastic bags. The SealMate™ system reduces laboratory waste because the film is rolled on itself with no extra paper or plastic liner to be discarded before sealing the plate.
The dispenser is easy to use!
- 1. Pull out one seal
2. Apply to plate
3. Tear at the perforation
4. Seal the film with the bottom of the dispenser