The SciLogex D160 Homogenizer can rapidly homogenize, disperse, and emulsify samples in 0.1-50ml of liquid or 1-250ml depending on the generating probe (sold separately). During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 30,000rpm. The material is repeatedly cycled through narrow slits in the gernerator probe where it is rapidly sheared and disintegrated by high shear. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in a few seconds. Little, if any, heat is produced during the process.
D160 Homogenizer Features:
- Ideal for mixing, emulsification, shredding, or chopping
(Not suitable for very viscous liquids or powders, 5000 cps/mPa-s max.) - Practical answer for small samples
- Easy to hold and light weight for one hand operation
- Shaftss are made of 316L Stainless Steel with Teflon bushings
- Autoclavable stainless steel generators/probes (sold separately).
Inert to aggressive solutions - Generator/Probes are interchangeable and easily removed for cleanup
- High speed motor. Speed control from 8,000 to 30,000 rpm
- Suitable for solvents and abrasive substances
- 2 YEAR WARRANTY
D160 Homogenizer Specifications:
| Speed range | : | 8,000-30,000rpm |
Sample volume range
| : | 0.1 - 250ml |
Speed control
| : | 6 position control dial |
Motor type
| : | Universal motor, 130 Watt |
pH range
| : | 2-13 |
Fineness
| : | Suspensions & Emulsion 10-15 & 1-10um |
| Noise emission | : | < 54 dB(A) at 30,000 rpm |
| Dimensions | : | 2.5L x 2.5W x 8H inches (drive only) |
| Weight | : | 18lbs (with stand) 1.5lbs (drive only) |
| Voltage | : | 110Volts, 60Hz |
Note, accessories are sold separately (Generator Probes, Stand, and replacement Bushings).